Booster Unit
Instructional video on how to add and remove a booster unit to a standard ATU unit.https://youtu.be/L0kvQkpve9g
DOP Filter Testing Kit
https://youtu.be/WLdpNdjntXE
FAN 600 Filter Change Out Procedure
CTS Containment systems are designed to provide a safe handling environment for users when working with potent powders. Unlike a BioSafety Cabinet, the types of substances being handled inside CTS enclosures cannot be neutralised by carrying out a VHP decontamination. For this reason, the CTS systems are designed to be...
ClimateZone™ Service
https://youtu.be/3dsTD1j1K-k Step by Step instruction for ClimateZoneTM Service
Biological Safety Cabinets
Biological safety cabinets (BSC) will provide both product and operator protection, this is achieved by recirculating HEPA-filtered air within the cabinet as well as providing an inflow at the face opening. Biological safety cabinets are specifically designed for the handling of samples that present a biological hazard. Design...
Smart Glasses Set up for Engineer Call
Step by Step instructions on how to set up Epsom Smart Glasses Moverio bt-350 on an engineer call
Risk Analysis Checklist
Prior to working with potentially hazardous compounds or new processes within the laboratory, a risk analysis of the hazards involved should be performed. Below is a list of some consideration areas when carrying out this type of risk analysis.What data are available on the drug?What safety datasheets (SDS) are available?What...
Chemical Criteria By Drug Category
The following table shows the chemical criteria by drug category. It uses the varying properties of drugs and places them in their respective category: Low Toxicity (1), Intermediate Toxicity (2), Potent (3) or Highly Potent (4). This table is useful in determining the types of Safety and Engineering controls that need to be put in...
Logo Controller Program Card Install
Step by Step instructions on how to install a program on a Logo controller for gloveboxes and isolators.